Click to enlarge.
|
Johnny Matlock, ACØBQ, installed the Freq-Mite in his 2N2/XX-40.
His notes are below.
Over view of the installation:
Mounted pcb and pb switch on rear panel.
Power from power jack nearby.
AF out to top of R5 with 1meg series resistor.
RF in connected to top of R41
Offset set to 915 (see pics)
If audio level is too low decrease the size of the series AF resistor.
Note: This offset programming is for the 2N2/40 only. The 2N2/30 and 2N2/20 have
different IF frequecies.
|
|